Scroll-matched exchangers涡旋配套换热器
Scroll-matched heat exchanger涡旋配套机组换热器
Heat exchanger sized for 3 – 90 HP scroll compressors, selected by compressor horsepower rather than by kW. Supplied as a condenser duty: the heat rejected by the compressor at its nominal working point.按 3 – 90 HP 涡旋压缩机配套选型的换热器，以压缩机匹数而非制冷量选型。按冷凝负荷供货，即压缩机名义工况运行时的冷凝热。
Interfaces, drawn and tabulated接口：图示与表格
Each connection carries the same code on the drawing, in the table above and in the dimension schedule below, so a contractor can read one against the other.每个接口在示意图、上方参数表与下方接口表中使用同一代号，便于施工方互相对照。
Sizes are given exactly as printed: DN, inch or φ. Where the catalogue left a value blank, the field stays blank here.尺寸严格按画册原文标注：DN、英寸或 φ。画册未填的项，此处同样留空。
One shell, one duty, built to the compressor it serves一种筒体，一种工况，按所配压缩机定制
Heat exchanger sized for 3 – 90 HP scroll compressors, selected by compressor horsepower rather than by kW. Supplied as a condenser duty: the heat rejected by the compressor at its nominal working point.按 3 – 90 HP 涡旋压缩机配套选型的换热器，以压缩机匹数而非制冷量选型。按冷凝负荷供货，即压缩机名义工况运行时的冷凝热。
Every figure on this page is transcribed from the manufacturer's catalogue. Where a value was not published, it is marked as to be confirmed rather than estimated.本页所有数据均取自厂家画册。画册未公布的项目一律标注为待确认，不作估算。
Every published model, 14 in this series本系列共公布 14 个型号
Capacity, dimensions, nozzle sizes and weight — the complete table as published. Scroll it sideways on a narrow screen; the header stays in place.制冷量、外形尺寸、管口尺寸与重量 —— 画册公布的完整参数表。窄屏下可横向滚动，表头固定。
| Model型号 | HP压缩机功率 | AA | BB | CC | DD | EE | FF | GG | a1/a2a1/a2 | a3a3 | a4a4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HY-QWS3 | 3P | 810 | 270 | 410 | 630 | 450 | 100 | 127 | 1-1/2" | 3/4 | 3/8 |
| HY-QWS5 | 5P | 1040 | 270 | 410 | 860 | 600 | 100 | 159 | 1-1/2" | 3/4 | 1/2 |
| HY-QWS8 | 8P | 1040 | 270 | 410 | 860 | 600 | 100 | 159 | 1-1/2" | 1 | 5/8 |
| HY-QWS10 | 10P | 1120 | 270 | 410 | 940 | 700 | 150 | 159 | 1-1/2" | 1-1/8 | 5/8 |
| HY-QWS15 | 15P | 1120 | 270 | 410 | 940 | 700 | 150 | 219 | 1-1/2" | 1-1/8 | 3/4 |
| HY-QWS20 | 20P | 1120 | 270 | 410 | 940 | 700 | 150 | 219 | 1-1/2" | 1-5/8 | 3/4 |
| HY-QWS25 | 25P | 1270 | 270 | 410 | 1090 | 800 | 180 | 219 | 1-1/2" | 1-5/8 | 3/4 |
| HY-QWS30 | 30P | 1340 | 270 | 470 | 1090 | 800 | 180 | 273 | 2-1/2"2 | 1-5/8 | 7/8 |
| HY-QWS40 | 40P | 1520 | 270 | 470 | 1270 | 800 | 200 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
| HY-QWS50 | 50P | 1770 | 270 | 470 | 1520 | 1000 | 200 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
| HY-QWS60 | 60P | 2030 | 270 | 470 | 1780 | 1000 | 200 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
| HY-QWS40 | 70P | 2280 | 270 | 470 | 2030 | 1500 | 200 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
| HY-QWS80 | 80P | 2530 | 270 | 470 | 2280 | 1500 | 200 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
| HY-QWS90 | 90P | 2840 | 270 | 470 | 2590 | 1800 | 250 | 273 | 2-1/2"2 | 2-1/8 | 1-1/8 |
Where the series steps up量程如何递进
HY-QWS3
HY-QWS8
HY-QWS15
HY-QWS25
HY-QWS40
HY-QWS60
How it is put together, and what plugs in where如何构成，以及各接口的位置
Heat exchanger selected by compressor horsepower rather than by kW, and supplied against condenser duty — the heat the compressor rejects at its nominal working point.按压缩机匹数而非制冷量选型，按冷凝负荷供货，即压缩机名义工况下排出的冷凝热。
Vent and drain connections let the water side be emptied and purged in place, so the unit does not have to be lifted out for routine cleaning.排气与排污接口使水路可现场排空与冲洗，日常清洗无需吊装机组。
How to read these numbers如何理解这些数字
- Compressor nominal working condition: condensing temperature 40 °C, evaporating temperature −5 °C. The heat exchange duty of this condenser series is the condensing heat of the compressor at that working point; confirm with the compressor maker's selection software.压缩机名义工况：冷凝温度 = 40 ℃，蒸发温度 = −5 ℃。该系列冷凝器的换热量为压缩机在名义工况运行时的冷凝热，可按压缩机厂家提供的选型软件查询。
- A dimension drawing is not reproduced on this page: the catalogue drawing for this series could not be cropped cleanly enough to be legible. Ask for the original drawing.本页未收录尺寸示意图：该系列在画册中的图纸裁切后清晰度不足，故不采用。如需要请索取原图。
- Source table lists two rows as “HY-QWS40” (40P and 70P); the 70P row is likely intended to read HY-QWS70 — confirm the model code.Source table lists two rows as “HY-QWS40” (40P and 70P); the 70P row is likely intended to read HY-QWS70 — confirm the model code.
Send us the duty, we will send back a model把工况发给我们，我们回你一个型号
Give the cooling capacity, the working temperatures and the refrigerant, and the selection comes back with a nozzle arrangement and a price.提供制冷量、工况温度与制冷剂，我们会连同管口布置与报价一并回复。