Screw unit heat exchanger, double head汉钟螺杆双机头方板Request a selection索取选型

Screw unit heat exchangers螺杆机组配套换热器

Screw unit heat exchanger, double head汉钟螺杆双机头方板

Two Hanbell RC2 compressors on one square-plate frame, driving two shell-and-tube bundles from a single wall of nozzles. Built for the 173 – 2,005 kW band where a single head would make the shell impractically long.同一位于方板机架上的两台汉钟 RC2 螺杆压缩机，通过同一侧管口配置驱动两组壳管束。适用于 173 – 2005 kW 区间，避免单机头方案筒体过长。

Hanbell screw-matched unit heat exchanger series (double head) — square plate
Request a selection索取选型See every model查看全部型号
173
Cooling capacity制冷量
2590mm
Length A (first model)总长 A（首型号）
20
Published models公布型号
600kg
Weight (first model)重量（首型号）
Overview概览

One shell, one duty, built to the compressor it serves一种筒体，一种工况，按所配压缩机定制

Two Hanbell RC2 compressors on one square-plate frame, driving two shell-and-tube bundles from a single wall of nozzles. Built for the 173 – 2,005 kW band where a single head would make the shell impractically long.同一位于方板机架上的两台汉钟 RC2 螺杆压缩机，通过同一侧管口配置驱动两组壳管束。适用于 173 – 2005 kW 区间，避免单机头方案筒体过长。

Every figure on this page is transcribed from the manufacturer's catalogue. Where a value was not published, it is marked as to be confirmed rather than estimated.本页所有数据均取自厂家画册。画册未公布的项目一律标注为待确认，不作估算。

Series系列
HY-LGW-D
Range begins量程下限
173
Shell B (first model)筒体 B（首型号）
950mm
Weight (first model)重量（首型号）
600kg
Hanbell screw-matched unit heat exchanger series (double head) — square plate
The series as built. No dimension drawing is published for this series in the catalogue; the photograph shows the arrangement, not the dimensions.本系列成品实拍。画册未公布本系列的尺寸图；照片仅示意结构布置，不作为尺寸依据。
Construction & interfaces结构与接口

How it is put together, and what plugs in where如何构成，以及各接口的位置

Two shells on one square-plate frame, each with its own tube bundle and refrigerant circuit, driven by two compressors. The frame is the datum that keeps both bundles aligned.同一方板机架上并联两组筒体，各自独立管束与制冷回路，由两台压缩机分别驱动。机架作为基准保证两组管束对中。

Vent and drain connections let the water side be emptied and purged in place, so the unit does not have to be lifted out for routine cleaning.排气与排污接口使水路可现场排空与冲洗，日常清洗无需吊装机组。

Heat exchanger tube换热管
High-efficiency internal/external screwed copper tube高效内外螺纹铜管
Reference model参考型号
HY-LGW60D
Length A总长 A
2590mm
Shell B筒体 B
950mm
Code代号Size尺寸Function作用
a1a2DN80water in / out进 / 出水口
b1b2DN80water in / out进 / 出水口
a3DN40vent排气口
a428drain排污口
b3φ35refrigerant connection制冷剂接口
b4DN80refrigerant connection制冷剂接口
Connections as printed for the first published model of this series.接口尺寸按本系列首个公布型号标注。
Models型号

Every published model, 20 in this series本系列共公布 20 个型号

Capacity, dimensions, nozzle sizes and weight — the complete table as published. Scroll it sideways on a narrow screen; the header stays in place.制冷量、外形尺寸、管口尺寸与重量 —— 画册公布的完整参数表。窄屏下可横向滚动，表头固定。

Lowest published model最小公布型号
173kW
Highest published model最大公布型号
2005kW
Models in this series本系列型号数
20
Weight (first model)重量（首型号）
600kg
Model型号Compressor适配压缩机Cooling capacity制冷量AABBCCDDEEFFa1/a2a1/a2b1/b2b1/b2a3a3a4a4b3b3b4b4Weight重量
HY-LGW60DRC2-100B*217325909509802200219273DN80DN80DN4028φ35DN80600
HY-LGW80DRC2-140B*223925909509802200219273DN80DN80DN4028φ35DN80800
HY-LGW100DRC2-180B*2313.62900101011302500273325DN80DN100DN4028φ35DN801000
HY-LGW120DRC2-200B*23372900102011302500273373DN80DN125DN4028φ35DN801200
HY-LGW140DRC2-230B*2418.62900102011302500273373DN80DN125DN5035φ35DN801400
HY-LGW160DRC2-260B*2450.82900102011302500273373DN80DN125DN5035φ35DN801600
HY-LGW170DRC2-300B*2531.23410102012203000325426DN80DN125DN5035φ35DN1001700
HY-LGW180DRC2-310B*2561.23410102012203000325426DN100DN150DN5035φ35DN1001800
HY-LGW200DRC2-340B*2624.83410102012203000325426DN100DN150DN6535φ35DN1002000
HY-LGW240DRC2-410B*26733450126513003000325480DN125DN200DN65422-φ35DN1002400
HY-LGW280DRC2-470B*2888.63450126513003000325480DN125DN200DN65422-φ35DN1002800
HY-LGW300DRC2-510B*2928.83450130013853000355530DN125DN200DN65422-φ35DN1003000
HY-LGW320DRC2-550B*21027.23450130013853000355530DN150DN200DN65422-φ35DN1003200
HY-LGW340DRC2-580B*21112.43550130013853000377530DN150DN200DN65422-φ35DN1253400
HY-LGW360DRC2-620B*21155.23550130013853000377530DN150DN200DN65422-φ35DN1253600
HY-LGW400DRC2-710B*21345.23550130013853000377530DN200DN200DN100542-φ35DN1254000
HY-LGW440DRC2-790B*214484110160015653500377580DN200DN250DN100542-φ35DN1254200
HY-LGW480DRC2-830B*215764110170016503500426630DN200DN250DN100542-φ35DN1254800
HY-LGW600DRC2-930B*217784110170016503500426630DN200DN250DN100542-φ35DN1256000
HY-LGW700DRC2-1020B*220054550185016504000426720DN200DN250DN100672-φ35DN1257000
Range at a glance量程一览

Where the series steps up量程如何递进

HY-LGW60D

173
Heat transfer area换热面积

HY-LGW120D

337
Heat transfer area换热面积

HY-LGW170D

531.2
Heat transfer area换热面积

HY-LGW240D

673
Heat transfer area换热面积

HY-LGW320D

1027.2
Heat transfer area换热面积

HY-LGW400D

1345.2
Heat transfer area换热面积
Interfaces接口

Interfaces, drawn and tabulated接口：图示与表格

Each connection carries the same code on the drawing, in the table above and in the dimension schedule below, so a contractor can read one against the other.每个接口在示意图、上方参数表与下方接口表中使用同一代号，便于施工方互相对照。

Sizes are given exactly as printed: DN, inch or φ. Where the catalogue left a value blank, the field stays blank here.尺寸严格按画册原文标注：DN、英寸或 φ。画册未填的项，此处同样留空。

a1a2 · water in / outa1a2 · 进 / 出水口
DN80
b1b2 · water in / outb1b2 · 进 / 出水口
DN80
a3 · venta3 · 排气口
DN40
a4 · draina4 · 排污口
28
b3 · refrigerant connectionb3 · 制冷剂接口
φ35
b4 · refrigerant connectionb4 · 制冷剂接口
DN80
Hanbell screw-matched unit heat exchanger series (double head) — square plate
How the nozzles are arranged on the shell. No dimension drawing is published for this series in the catalogue; the photograph shows the arrangement, not the dimensions.管口在筒体上的布置。画册未公布本系列的尺寸图；照片仅示意结构布置，不作为尺寸依据。
Code代号Size尺寸Function作用
a1a2DN80water in / out进 / 出水口
b1b2DN80water in / out进 / 出水口
a3DN40vent排气口
a428drain排污口
b3φ35refrigerant connection制冷剂接口
b4DN80refrigerant connection制冷剂接口
Interface schedule, first published model.接口表，首个公布型号。
Specifications & conditions规格说明与工况

How to read these numbers如何理解这些数字

Management certificates管理体系认证
ISO 9001 / ISO 14001
Certificates valid to证书有效期至
2028-03-13
Refrigerant制冷剂（待确认）
—
Published notes画册备注条数
4
  1. Nominal cooling capacity at compressor condensing temperature 40 °C and evaporating temperature 2 °C, in kW.压缩机冷凝温度 = 40 ℃、蒸发温度 = 2 ℃ 时的名义制冷量，单位为 kW。
  2. This heat exchanger series can be matched to screw compressors from Legon, BITZER and Fusheng.此换热器系列可配置莱富康、比泽尔、复盛等品牌的螺杆压缩机。
  3. Brand names are transliterated from the Chinese catalogue; the Chinese page lists the original characters.画册原文中的品牌名称：莱富康（Legon）、比泽尔（BITZER）、复盛（Fusheng）。
  4. A dimension drawing is not reproduced on this page: the catalogue drawing for this series could not be cropped cleanly enough to be legible. Ask for the original drawing.本页未收录尺寸示意图：该系列在画册中的图纸裁切后清晰度不足，故不采用。如需要请索取原图。

Send us the duty, we will send back a model把工况发给我们，我们回你一个型号

Give the cooling capacity, the working temperatures and the refrigerant, and the selection comes back with a nozzle arrangement and a price.提供制冷量、工况温度与制冷剂，我们会连同管口布置与报价一并回复。

Request a selection索取选型Open the selection bench打开选型台
Sales & export销售与出口
[email protected]
Telephone联系电话
13802582154 · 13602639186 · 0752-6681498 · 0753-5881188
WhatsAppWhatsApp
+8613802582154
WeChat: 1014141102微信：1014141102
Reply time响应时间
Enquiries are answered within one working day, China time (Mon–Sat).询价在一个工作日内回复（北京时间，周一至周六）。
If a form does not go through, write to [email protected] — it reaches the same desk.若表单未能提交，请直接写信到 [email protected]，同样送达询价专员。
Data protection: enquiry details are used only to prepare a quotation and are never shared with third parties. Privacy notice.信息保护：询价信息仅用于准备报价，不提供给第三方。隐私说明。