Modular chiller evaporators模块机蒸发器
Modular-chiller evaporator模块机专用蒸发器
Two shell-and-tube evaporators sized for modular chiller assemblies — 65 kW and 130 kW heat transfer area ratings, 2" and 2-1/2" water connections.面向模块化冷水机组配套的两款壳管式蒸发器，换热面积对应 65 kW 与 130 kW，水管接口分别为 2" 与 2-1/2"。
How it is put together, and what plugs in where如何构成，以及各接口的位置
Compact shell-and-tube evaporator sized for modular chiller assemblies, with the water connections brought out on the shell axis to keep the module footprint tight.面向模块化冷水机组的紧凑型壳管蒸发器，水管接口沿筒体轴线引出，压缩模块占地。
Vent and drain connections let the water side be emptied and purged in place, so the unit does not have to be lifted out for routine cleaning.排气与排污接口使水路可现场排空与冲洗，日常清洗无需吊装机组。
Interfaces, drawn and tabulated接口：图示与表格
Each connection carries the same code on the drawing, in the table above and in the dimension schedule below, so a contractor can read one against the other.每个接口在示意图、上方参数表与下方接口表中使用同一代号，便于施工方互相对照。
Sizes are given exactly as printed: DN, inch or φ. Where the catalogue left a value blank, the field stays blank here.尺寸严格按画册原文标注：DN、英寸或 φ。画册未填的项，此处同样留空。
One shell, one duty, built to the compressor it serves一种筒体，一种工况，按所配压缩机定制
Two shell-and-tube evaporators sized for modular chiller assemblies — 65 kW and 130 kW heat transfer area ratings, 2" and 2-1/2" water connections.面向模块化冷水机组配套的两款壳管式蒸发器，换热面积对应 65 kW 与 130 kW，水管接口分别为 2" 与 2-1/2"。
Every figure on this page is transcribed from the manufacturer's catalogue. Where a value was not published, it is marked as to be confirmed rather than estimated.本页所有数据均取自厂家画册。画册未公布的项目一律标注为待确认，不作估算。
Every published model, 2 in this series本系列共公布 2 个型号
Capacity, dimensions, nozzle sizes and weight — the complete table as published. Scroll it sideways on a narrow screen; the header stays in place.制冷量、外形尺寸、管口尺寸与重量 —— 画册公布的完整参数表。窄屏下可横向滚动，表头固定。
| Model型号 | Heat transfer area换热面积 | AA | BB | CC | DD | EE | a1/a2a1/a2 | a3a3 | a4a4 | Weight重量 |
|---|---|---|---|---|---|---|---|---|---|---|
| HY-CS65KW | 65 | 1920 | 300 | 735 | 1550 | 165 | 2" | 19 | 28 | 80 |
| HY-CS130KW | 130 | 2160 | 300 | 745 | 1575 | 245 | 2-1/2" | 22 | 28 | 140 |
Where the series steps up量程如何递进
HY-CS65KW
HY-CS130KW
How to read these numbers如何理解这些数字
- Heat exchange at evaporating temperature 2 °C, inlet water 12 °C, outlet water 7 °C.蒸发温度 2 ℃、进水温度 12 ℃、出水温度 7 ℃ 时的换热量。
- A dimension drawing is not reproduced on this page: the catalogue drawing for this series could not be cropped cleanly enough to be legible. Ask for the original drawing.本页未收录尺寸示意图：该系列在画册中的图纸裁切后清晰度不足，故不采用。如需要请索取原图。
Send us the duty, we will send back a model把工况发给我们，我们回你一个型号
Give the cooling capacity, the working temperatures and the refrigerant, and the selection comes back with a nozzle arrangement and a price.提供制冷量、工况温度与制冷剂，我们会连同管口布置与报价一并回复。